Jabra Link 22 Electronic Hookswitch for Cisco Phones (#14201-22)

Compatible with Cisco Unified IP Phones: Cisco Unified IP Phone 7975G, Cisco Unified IP Phone 7945G, Cisco Unified IP Phone 7965G, Cisco Unified IP Phone 7942G, Cisco Unified IP Phone 7962G

The Jabra 14201-22 EHS Adapter enables remote Electronic Hook Switch Control (EHS) with Jabra wireless headsets and selected Cisco IP phones.

This means that users can hear ring tones, answer and end calls, adjust the volume or even mute the call up to 450 ft. away from their desks. The integration of handset and headset allows users to benefit from enhanced mobility and the ability to multitask while on a call. The wireless freedom improves work efficiency and ergonomics throughout the day.

HOW IT WORKS
The EHS Adapter is a plug-and-play solution that converts from the DHSG standard used in Cisco phones to the DHSG standard used in Jabra headsets and vice versa.

HANDSET-HEADSET COMPATIBILITY
The EHS Adapter is compatible with a wide range of Cisco phones.

THE EHS ADAPTER CAN BE USED WITH THESE JABRA HEADSETS

Important Note:

Your telephone system administrator must have "Wireless Headset Hookswitch Control" enabled for your telephone.

Below are the instructions to enable Hookswitch Control feature:

• Make sure the CUCM version is 4.1(3)SR5x or higher
• Make sure the phone F/W is 8.3(3)x or higher
• Access the server administrator with a browser
• Select Device > Phone through the drop down menus
• Click "Find" with no selection criteria to obtain a list of all phones
• Open the desired phone. Scroll down to "Wireless Headset Hookswitch Control", set to "Enabled", Click "Apply"
• Reboot the phone

UPC Code: 706487010746